1. Check before use

Before using the winder, check the use status of the machine's anchor screws. If it is loose, it must be repaired. In addition, it is necessary to check whether the guide rails and rotating parts are properly lubricated. The operator should also check the machine before using it. Are there any obstructions on it?

Second, the correct use process

After the power supply of the winder is turned on, it needs to idle for 1-3 minutes to clamp the steel belt before entering the next process. In the process of use, be sure to monitor the entire operation. Turn off the power, and the operator needs to do the operation of cleaning the machine.

For safe operation, it is also necessary to avoid the lack of oil in the lubricating parts of the machine during the use of the winder, and to refuel regularly. It is strictly forbidden to clean the machine during the operation of the winder.